Skip to main content
WattMate
WattMate
Help with my systemCheck my quote
Get quotes
  • Independent
  • Transparent flat fees
  • You choose when to share your details
  • WA-only
  • Quotes from WattMate Members
WattMateWattMate

Western Australia's solar and battery platform. Free and independent.

Fighting dodgy deals and bill shock, one rooftop at a time.

08 9429 8803
admin@wattmate.com.au

Solar journey

  • Get quotes
  • Check my quote
  • Energy assessment
  • Product index
  • Find installers

Learn

  • Learning hub
  • Blog
  • All tools
  • FAQ

Help

  • Help centre
  • Contact
  • Emergency

Company

  • About
  • Compliance
  • Partner with us
  • Pricing

Legal

  • Privacy policy
  • Terms of service
  • Disclosure
  • Review policy
  • Cookie policy
© 2026 WattMate Pty Ltd · ABN 27 687 682 220
Supporting members of the Clean Energy Council
Back to blog
Home/Blog/Solar panels in Perth: what drives the cost

Solar panels in Perth: what drives the cost

What moves the price of solar in Perth: system size, equipment, installer and the job itself, plus the Synergy charges that never appear on the quote.

Published 19/06/2026Updated 04/11/20266 min read

On this page

  • What decides the cost of solar in Perth?
  • What does the STC discount take off the price?
  • What costs sit outside the installer's quote?
  • What makes solar quotes differ in price?
  • Why shouldn't you buy solar on price alone?
  • How do you judge solar value over the system's life?
  • About this guide
  • What to do next
  • Sources

By the WattMate editorial team. Reviewed against the Clean Energy Regulator's STC rules and Synergy's connection and DEBS terms, 4 November 2026.

Key takeaways

  • Four things drive the price: system size, the equipment, the installer and how hard the job is.
  • Perth quotes are almost always shown after the STC discount, with GST included.
  • Synergy's connection charges, such as a meter change, arrive on your power bill, not on the installer's quote.
  • Judge a system over its working life, not on the first year's bill.

What decides the cost of solar in Perth?

What a solar system costs in Perth comes down to four things: its size, the panels and inverter on the quote, the installer, and how hard your roof is to work on. A bigger system costs more in total, but each extra kilowatt usually costs less than the first few. So ask what each quote includes.

Before you ask for quotes, WattMate's free energy audit report works out which system size fits your home from your Synergy bill and a few questions about the house.

Quotes in Perth are almost always shown for supply and installation, with GST included and the STC discount already taken off. Check that every quote you compare is shown the same way.

What tends to sit in a higher-priced quote:

  • Panels and an inverter with longer warranties and local service support
  • An established local installer with in-house crews
  • A harder job: a steep or multi-storey roof, split roof faces, three-phase power, or a switchboard that needs work

What tends to sit in a lower-priced quote:

  • Entry-level components with shorter warranties
  • Subcontract crews, or an installer with no local service team
  • A simple, single-storey roof with one clear north face

Hills, regional and complex-access sites, such as steep roof pitches and multi-storey homes, tend to attract labour surcharges.

What does the STC discount take off the price?

STCs (small-scale technology certificates) are credits your installer takes off the price at the point of sale. The discount grows with system size, and it's already taken off the price on nearly every Perth quote. If a quote shows a "before STC" and "after STC" price, the "after STC" price is what you pay.

The value per system steps down each January as the scheme winds toward its close, and it moves a little with the certificate price. The Perth solar rebates guide shows today's figures and how they're worked out.

Almost nobody pays the "before STC" number, so read it as a marketing figure rather than a price.

What costs sit outside the installer's quote?

Synergy's connection charges. When a system connects, Synergy charges a one-off DEBS administration fee, and a meter upgrade or reprogram where one is needed, plus communications equipment in some cases. These are billed on your power bill after the install, not on the installer's quote, so ask your installer which of them apply to your meter.

This is the part most quote comparisons miss, because it doesn't show up until the next bill.

What makes solar quotes differ in price?

Four things move the price between quotes: the panels, the inverter, installer overhead and system complexity. Higher-priced panels and inverters and established local installers cost more, so check what the warranty and local support add for that price.

Start with the panels. Efficiency is how much sunlight a panel turns into power, and it differs between models. The datasheet on each quote shows it, along with the performance warranty (the guarantee on how slowly output may fall). On the inverter, monitoring and warranty terms vary by brand and model, so compare those too.

The installer is the next cost. Established Perth installers with in-house crews and local service staff cost more than sole traders or interstate companies using subcontract crews. You're paying for a business that's still around and answering calls when a warranty claim comes up years later.

Then there's the job itself. Parallel strings for east-west arrays, three-phase inverters and service connections to underground boards all add cost. So does partial shading, because it calls for DC optimisers or microinverters, small devices that manage output panel by panel.

Why shouldn't you buy solar on price alone?

Because a much cheaper quote is usually cheaper for a reason. A quote well below the others for the same specification deserves a closer look. The usual reasons are entry-level components with shorter warranties and less local support, corners cut on the install, or an installer less likely to respond to a warranty claim.

Get three quotes from SAA-accredited Perth installers and compare equivalent specifications: similar panel wattage and a comparable inverter model. That shows the market rate and where each installer sits against it. How to negotiate a solar quote in Perth covers what movement to ask for.

How do you judge solar value over the system's life?

A first-year payback figure is a poor guide to which system to buy. Judge solar and batteries over the system's life, around 25 years. On that basis the answer often changes, as the three points below show.

  • Solar only stays at 6.6kW of panels on a 5kW inverter, because that keeps DEBS (Synergy's solar export payment). A solar-only system past the DEBS cap earns nothing for its export.
  • A bigger array with a battery often comes out ahead for a home that uses most of its power in the evening. With a battery connected, a hybrid inverter (one inverter that handles both solar and battery) can carry a bigger array, up to the inverter maker's maximum, and a 5kW hybrid still keeps DEBS.
  • Battery size should match your evening and overnight use. Undersizing is the costlier mistake, because adding capacity later usually means a second installation.

Ask installers to price both designs on the same quote, then compare them on their value over the years they keep working. The free energy audit report shows which design your usage points to.


About this guide

WattMate's editorial team writes these guides for Perth households. This guide gives no installed prices on purpose, because a single figure would mislead more than it helps. WattMate isn't an installer and doesn't sell solar systems.

What to do next

A quote's total only means something once you know what's in it, what's left for your power bill, and which design suits how your house uses power. Settle the design first, then compare itemised quotes on the same basis. Get your free energy audit report to start. It reads your Synergy bill and answers, and shows whether solar alone or solar with a battery fits your home.

Sources

  • Clean Energy Regulator, small-scale renewable energy systems (STCs)
  • Synergy, DEBS, REBS and DES solar application (getting-connected charges)
  • Synergy, Distributed Energy Buyback Scheme

Frequently asked questions

Is the price on a Perth solar quote before or after the STC discount?
Almost always after. Perth quotes are usually shown for supply and installation, with GST included and the STC discount already taken off. Check that every quote you compare is shown the same way.
Why doesn't this guide give a price?
Installed prices swing with roof, system size, equipment and installer, and a single headline number would mislead more than it helps. An itemised quote for your own roof is the reliable figure, and the drivers on this page tell you how to read it.
Does a bigger system cost more per kilowatt?
Usually less. The labour and paperwork don't grow at the same rate as the panel count, so each extra kilowatt tends to cost less than the first few. Whether the extra size pays off depends on whether you use or store the power rather than export it.
How WattMate checks its facts

Want to know what your own bill says?

Upload your Synergy bill, or type in the numbers, to see your free results: where the power goes and what size system suits the house. For the full detailed report, including what the rebates look like for you, we also ask for your contact details and address, and your OK to pass them to installers who can quote.

Get your free energy audit report

Related articles

Solar carports in Perth: cost, approval, output

Solar10 min read
Read

Ground mounted solar panels in Perth

Solar10 min read
Read

CEC approved solar panels and products in Perth

Solar8 min read
Read
Solar panels in Perth: what drives the cost | WattMate