SolarEdge battery error code Discharge Over Current
WattMate is not affiliated with SolarEdge. This page summarises SolarEdge's own published documentation; your installer and SolarEdge are the authority on your system. WattMate doesn't repair systems or make site visits.
What it means
- Meaning
- The current during discharge exceeds the limit.
- Likely cause
- Load is too high for the battery capacity.
- What the manual says to do
- Reduce connected load and check connections.
- Manufacturer's severity
- Warning
Extracted from SolarEdge's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- SolarEdge warranty phone
- +61 1800 465 567
- SolarEdge warranty email
- support@solaredge.net.au
- SolarEdge service network
- Open the manufacturer's service page