SAJ error code 6
SAJ uses code 6 in more than one product range, and it doesn't always mean the same thing. Check which range your equipment belongs to below.
WattMate is not affiliated with SAJ. This page summarises SAJ's own published documentation; your installer and SAJ are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Chs2
- Meaning
- GFCI Device Error
- Likely cause
- Fault in Ground Fault Circuit Interrupter.
- What the manual says to do
- Inspect GFCI; contact installer if issues continue.
- Manufacturer's severity
- Critical
SAJ's documentation says this one needs your installer.
Extracted from SAJ's published manual. Check it against the manual for your model. Open the source document
As documented for Chs2
- Meaning
- GFCI Device Error
- Likely cause
- The inverter GFCI device fails.
- What the manual says to do
- After turning off AC/DC switch for 5 minutes, restart the inverter.
- Manufacturer's severity
- Warning
Extracted from SAJ's published manual. Check it against the manual for your model. Open the source document
As documented for H2
- Meaning
- GFCI Device Error
- Likely cause
- Ground Fault Circuit Interrupter malfunction.
- What the manual says to do
- Check GFCI settings or replace; if unsure, contact installer.
- Manufacturer's severity
- Warning
SAJ's documentation says this one needs your installer.
Extracted from SAJ's published manual. Check it against the manual for your model. Open the source document
As documented for Ek90 Hs5
- Meaning
- Master GFCI Device Error
- Likely cause
- Ground fault circuit interrupter malfunction
- What the manual says to do
- Reset the GFCI; contact installer for further assistance if necessary
- Manufacturer's severity
- Warning
Extracted from SAJ's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- SAJ warranty phone
- +61 1800 888 725
- SAJ warranty email
- support@saj-electric.com.au
- SAJ service network
- Open the manufacturer's service page