SAJ error code 4
SAJ uses code 4 in more than one product range, and it doesn't always mean the same thing. Check which range your equipment belongs to below.
WattMate is not affiliated with SAJ. This page summarises SAJ's own published documentation; your installer and SAJ are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Chs2
- Meaning
- Master Temperature Low Error
- Likely cause
- The inverter temperature is too low.
- What the manual says to do
- Check ambient temperature at installation location.
- Manufacturer's severity
- Warning
Extracted from SAJ's published manual. Check it against the manual for your model. Open the source document
As documented for H2
- Meaning
- Master Temperature Low Error
- Likely cause
- Low operating temperature, possibly frozen conditions.
- What the manual says to do
- Ensure operating environment is within range; if persists, contact installer.
- Manufacturer's severity
- Warning
SAJ's documentation says this one needs your installer.
Extracted from SAJ's published manual. Check it against the manual for your model. Open the source document
As documented for Chs2
- Meaning
- Master Temperature Low Error
- Likely cause
- Under temperature due to environmental factors.
- What the manual says to do
- Ensure unit is within operating temperature; contact installer if persists.
- Manufacturer's severity
- Warning
Extracted from SAJ's published manual. Check it against the manual for your model. Open the source document
As documented for Ek90 Hs5
- Meaning
- Master Temperature Low Error
- Likely cause
- Operating temperature below acceptable limits
- What the manual says to do
- Check ambient temperature; contact installer for further assistance if necessary
- Manufacturer's severity
- Warning
Extracted from SAJ's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- SAJ warranty phone
- +61 1800 888 725
- SAJ warranty email
- support@saj-electric.com.au
- SAJ service network
- Open the manufacturer's service page