HYXi POWER battery error code Pre-charge fault
HYXi POWER uses code Pre-charge fault in more than one product range, and it doesn't always mean the same thing. Check which range your battery belongs to below.
WattMate is not affiliated with HYXi POWER. This page summarises HYXi POWER's own published documentation; your installer and HYXi POWER are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for High Voltage Battery
- Meaning
- Fault detected during pre-charge phase.
- Likely cause
- Electrical issues or improper setup.
- What the manual says to do
- Prohibit high voltage. Restart the device and contact support if problem persists.
- Manufacturer's severity
- Critical
HYXi POWER's documentation says this one needs your installer.
Extracted from HYXi POWER's published manual. Check it against the manual for your model. Open the source document
As documented for High Voltage Battery
- Meaning
- There is an issue with the pre-charge process.
- Likely cause
- Improper device startup procedure.
- What the manual says to do
- Restart the device and contact Hyxi after-sales staff.
- Manufacturer's severity
- Warning
HYXi POWER's documentation says this one needs your installer.
Extracted from HYXi POWER's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- HYXi POWER warranty phone
- +61290995862
- HYXi POWER warranty email
- AU.support@hyxipower.com
- HYXi POWER service network
- Open the manufacturer's service page