Growatt battery error code POWER_CONN_FAIL
Growatt uses code POWER_CONN_FAIL in more than one product range, and it doesn't always mean the same thing. Check which range your battery belongs to below.
WattMate is not affiliated with Growatt. This page summarises Growatt's own published documentation; your installer and Growatt are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Apx S1
- Meaning
- Power cable connection failure
- Likely cause
- The power cable is disconnected from the hybrid inverter
- What the manual says to do
- Check whether the power cable is securely connected and if the switch is turned ON.
- Manufacturer's severity
- Critical
Growatt's documentation says this one needs your installer.
Extracted from Growatt's published manual. Check it against the manual for your model. Open the source document
As documented for Apx
- Meaning
- Power cable connection failure
- Likely cause
- Disconnection of power cable from the hybrid inverter
- What the manual says to do
- Check power cable connections and ensure switch is 'ON'.
- Manufacturer's severity
- Warning
Growatt's documentation says this one needs your installer.
Extracted from Growatt's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Growatt warranty phone
- 1800476928
- Growatt warranty email
- australia@growatt.com
- Growatt service network
- Open the manufacturer's service page