Growatt inverter error code 201
Growatt uses code 201 in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Growatt. This page summarises Growatt's own published documentation; your installer and Growatt are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Min 7000 10000tl X2
- Meaning
- Residual I High
- Likely cause
- Leakage current too high
- What the manual says to do
- 1. Restart the inverter. 2. If the error message still exists, contact Growatt.
- Manufacturer's severity
- Warning
Growatt's documentation says this one needs your installer.
Extracted from Growatt's published manual. Check it against the manual for your model. Open the source document
As documented for Min Tl Xh2
- Meaning
- Residual I High
- Likely cause
- Leakage current is excessively high
- What the manual says to do
- Restart the inverter. If the error message still exists, contact Growatt.
- Manufacturer's severity
- Warning
Growatt's documentation says this one needs your installer.
Extracted from Growatt's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Growatt warranty phone
- 1800476928
- Growatt warranty email
- australia@growatt.com
- Growatt service network
- Open the manufacturer's service page