Zenaji battery error code GREEN flash followed by three BLUE ‘double-flashes’
WattMate is not affiliated with Zenaji. This page summarises Zenaji's own published documentation; your installer and Zenaji are the authority on your system. WattMate doesn't repair systems or make site visits.
What it means
- Meaning
- Over-voltage with Restore
- Likely cause
- The battery voltage was greater than its maximum operating voltage and has restored to normal operating conditions.
- What the manual says to do
- Check inverter settings before reconnecting the battery to the system.
- Manufacturer's severity
- Information
Zenaji's documentation says this one needs your installer.
Extracted from Zenaji's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Zenaji warranty phone
- +61 438 698 325
- Zenaji warranty email
- support@zenaji.com
- Zenaji service network
- Open the manufacturer's service page