TNK battery error code 7
WattMate is not affiliated with TNK. This page summarises TNK's own published documentation; your installer and TNK are the authority on your system. WattMate doesn't repair systems or make site visits.
What it means
- Meaning
- Supervised Loop Fault
- Likely cause
- Check the installation of the wiring to all the manual actuation devices (push stations) and firestats.
- What the manual says to do
- Verify connections are secure, check for open/short circuits.
- Manufacturer's severity
- Critical
TNK's documentation says this one needs your installer.
Extracted from TNK's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- TNK warranty phone
- +61 3 9239 8088
- TNK service network
- Open the manufacturer's service page