Sungrow inverter error code 12
Sungrow uses code 12 in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Sungrow. This page summarises Sungrow's own published documentation; your installer and Sungrow are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Cx
- Meaning
- Excess Leakage Current
- Likely cause
- Poor environment or insulation issues.
- What the manual says to do
- Check insulation and improve environment if necessary.
- Manufacturer's severity
- Warning
Sungrow's documentation says this one needs your installer.
Extracted from Sungrow's published manual. Check it against the manual for your model. Open the source document
As documented for Residential
- Meaning
- Excess Leakage Current
- Likely cause
- Poor sunlight or damp environment
- What the manual says to do
- Wait for conditions to improve; check AC and DC cables for insulation.
- Manufacturer's severity
- Warning
Sungrow's documentation says this one needs your installer.
Extracted from Sungrow's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Sungrow warranty phone
- 1800 786 476
- Sungrow warranty email
- service@sungrowpower.com.au
- Sungrow service network
- Open the manufacturer's service page