Sungrow inverter error code 013
Sungrow uses code 013 in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Sungrow. This page summarises Sungrow's own published documentation; your installer and Sungrow are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Residential Hybrid
- Meaning
- Grid abnormal
- Likely cause
- Grid abnormalities can cause the inverter to disconnect.
- What the manual says to do
- The manual's steps for this code are for your installer.
- Manufacturer's severity
- Warning
Sungrow's documentation says this one needs your installer.
Extracted from Sungrow's published manual. Check it against the manual for your model. Open the source document
As documented for Rt
- Meaning
- Low ambient temperature
- Likely cause
- Inverter operating outside of specified temperature range.
- What the manual says to do
- Disconnect inverter and wait until ambient temperature is acceptable before restarting.
- Manufacturer's severity
- Warning
Extracted from Sungrow's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Sungrow warranty phone
- 1800 786 476
- Sungrow warranty email
- service@sungrowpower.com.au
- Sungrow service network
- Open the manufacturer's service page