Solplanet inverter error code 35
Solplanet uses code 35 in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Solplanet. This page summarises Solplanet's own published documentation; your installer and Solplanet are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Asw H T2 T3
- Meaning
- GFCI fault
- Likely cause
- Ground fault circuit interrupter has detected a fault
- What the manual says to do
- Check the grounding connection and renewable pressure.
- Manufacturer's severity
- Critical
Solplanet's documentation says this one needs your installer.
Extracted from Solplanet's published manual. Check it against the manual for your model. Open the source document
As documented for Asw Sh
- Meaning
- Fuse or Circuit Breaker Issue
- Likely cause
- Fuse blown or circuit breaker tripped.
- What the manual says to do
- The manual's steps for this code are for your installer.
- Manufacturer's severity
- Warning
Solplanet's documentation says this one needs your installer.
Extracted from Solplanet's published manual. Check it against the manual for your model. Open the source document
As documented for Asw45 60k Lt G3
- Meaning
- Grid loss
- Likely cause
- Check whether any AC circuit breakers downstream of the inverter AC output have switched off. Check the grid voltage to ensure that it is within the permitted values of the grid code. Check the AC cable and the cable connection at the inverter.
- What the manual says to do
- Inspect and reset any circuit breakers; ensure connections are secure and grid voltage is acceptable.
- Manufacturer's severity
- Warning
Solplanet's documentation says this one needs your installer.
Extracted from Solplanet's published manual. Check it against the manual for your model. Open the source document
As documented for Asw H S2
- Meaning
- Grid Connection Fault
- Likely cause
- Possible fuse or circuit breaker issue in the distribution box or AC connection.
- What the manual says to do
- The manual's steps for this code are for your installer.
- Manufacturer's severity
- Warning
Solplanet's documentation says this one needs your installer.
Extracted from Solplanet's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Solplanet service network
- Open the manufacturer's service page