Solplanet inverter error code 2
WattMate is not affiliated with Solplanet. This page summarises Solplanet's own published documentation; your installer and Solplanet are the authority on your system. WattMate doesn't repair systems or make site visits.
What it means
- Meaning
- Self-diagnosis fault
- Likely cause
- Disconnect the inverter from the utility grid and the PV array and reconnect it after the LEDs turn off. If this fault is still being displayed, contact Solplanet service.
- What the manual says to do
- Reset the inverter by disconnecting from both the grid and PV array; contact service if issue persists.
- Manufacturer's severity
- Critical
Solplanet's documentation says this one needs your installer.
Extracted from Solplanet's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Solplanet service network
- Open the manufacturer's service page