Solplanet inverter error code 10
Solplanet uses code 10 in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Solplanet. This page summarises Solplanet's own published documentation; your installer and Solplanet are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for ASW H T2 T3 O
- Meaning
- Grid Loss
- Likely cause
- Disconnected or unavailable grid connection.
- What the manual says to do
- Check grid connection, reset inverter if necessary; consult service if issue persists.
- Manufacturer's severity
- Critical
Solplanet's documentation says this one needs your installer.
Extracted from Solplanet's published manual. Check it against the manual for your model. Open the source document
As documented for ASW TH
- Meaning
- Device fault
- Likely cause
- Device has an internal fault.
- What the manual says to do
- Disconnect the inverter from the battery, the grid and the PV array and reconnect after 3 minutes. If this fault is still being shown, contact the service.
- Manufacturer's severity
- Warning
Solplanet's documentation says this one needs your installer.
Extracted from Solplanet's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Solplanet service network
- Open the manufacturer's service page