SolaX Power inverter error code IE:00020
SolaX Power uses code IE:00020 in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with SolaX Power. This page summarises SolaX Power's own published documentation; your installer and SolaX Power are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for X1 Boost G4
- Meaning
- Isolation Fault
- Likely cause
- There is an insulation fault detected in the system.
- What the manual says to do
- Check the connections of the inverter. If issues persist, consult us for solutions.
- Manufacturer's severity
- Critical
SolaX Power's documentation says this one needs your installer.
Extracted from SolaX Power's published manual. Check it against the manual for your model. Open the source document
As documented for X1 Mini G4
- Meaning
- Isolation Fault
- Likely cause
- Isolation impedance of the PV arrays is less than 20 KΩ.
- What the manual says to do
- Check the connections of the inverter.
- Manufacturer's severity
- Critical
SolaX Power's documentation says this one needs your installer.
Extracted from SolaX Power's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
We don't have a warranty line on file for SolaX Power yet. See the manufacturer contacts we do hold, or ask your installer.