Roypow error code 2
Roypow uses code 2 in more than one product range, and it doesn't always mean the same thing. Check which range your equipment belongs to below.
WattMate is not affiliated with Roypow. This page summarises Roypow's own published documentation; your installer and Roypow are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for N A
- Meaning
- Grid volt. 10-min average
- Likely cause
- The ten-minute average value of the effective value of the L1/L2/L3 voltage is above safety standards.
- What the manual says to do
- Check the grid voltage average. Contact the local power operator if necessary.
- Manufacturer's severity
- Critical
Roypow's documentation says this one needs your installer.
Extracted from Roypow's published manual. Check it against the manual for your model. Open the source document
As documented for Rbmax3 8mh Series
- Meaning
- BuckBoost2 rapid OC
- Likely cause
- Detect BuckBoost2 current greater than 40A, lasting 468.75us
- Manufacturer's severity
- Critical
Extracted from Roypow's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Roypow warranty phone
- 0451 968 884
- Roypow warranty email
- sales@roypow.com
- Roypow service network
- Open the manufacturer's service page