Redx battery error code Startup conditions are not met
Redx uses code Startup conditions are not met in more than one product range, and it doesn't always mean the same thing. Check which range your battery belongs to below.
WattMate is not affiliated with Redx. This page summarises Redx's own published documentation; your installer and Redx are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Rx 0050b
- Meaning
- The system cannot start due to unmet conditions.
- Likely cause
- Possible wiring issues or incorrect installation.
- What the manual says to do
- Check installation and ensure all conditions are met for startup.
- Manufacturer's severity
- Warning
Extracted from Redx's published manual. Check it against the manual for your model. Open the source document
As documented for Rx 7000plus Series
- Meaning
- The system has not started due to unmet conditions.
- Likely cause
- One or more initialization conditions are not fulfilled.
- What the manual says to do
- Check connections and ensure all startup conditions are satisfied.
- Manufacturer's severity
- Warning
Extracted from Redx's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Redx warranty phone
- +61 7 5672 9983
- Redx warranty email
- support@redx.com.au
- Redx service network
- Open the manufacturer's service page