Redx inverter error code Relay fault
Redx uses code Relay fault in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Redx. This page summarises Redx's own published documentation; your installer and Redx are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Rx 7000plus Series
- Meaning
- Relay malfunction detected
- Likely cause
- Relay failure
- What the manual says to do
- Allow the inverter to recover automatically; contact installer if issue continues.
- Manufacturer's severity
- Warning
Redx's documentation says this one needs your installer.
Extracted from Redx's published manual. Check it against the manual for your model. Open the source document
As documented for Rx
- Meaning
- Relay malfunction
- Likely cause
- Fault detected in relay.
- What the manual says to do
- Allow the inverter to recover automatically.
- Manufacturer's severity
- Warning
Redx's documentation says this one needs your installer.
Extracted from Redx's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Redx warranty phone
- +61 7 5672 9983
- Redx warranty email
- support@redx.com.au
- Redx service network
- Open the manufacturer's service page