Redx battery error code PV undervoltage
Redx uses code PV undervoltage in more than one product range, and it doesn't always mean the same thing. Check which range your battery belongs to below.
WattMate is not affiliated with Redx. This page summarises Redx's own published documentation; your installer and Redx are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Rx 0050b
- Meaning
- The voltage from the photovoltaic (PV) system is too low.
- Likely cause
- Insufficient sunlight or fault in the PV array.
- What the manual says to do
- Check PV array for obstructions or faults, and clean if necessary.
- Manufacturer's severity
- Warning
Extracted from Redx's published manual. Check it against the manual for your model. Open the source document
As documented for Rx 5000plus Series
- Meaning
- PV voltage is below acceptable limits
- Likely cause
- Insufficient sunlight or panel issues
- What the manual says to do
- Check PV conditions and ensure panels are clean and unobstructed.
- Manufacturer's severity
- Warning
Extracted from Redx's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Redx warranty phone
- +61 7 5672 9983
- Redx warranty email
- support@redx.com.au
- Redx service network
- Open the manufacturer's service page