Redx inverter error code Battery over current
Redx uses code Battery over current in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Redx. This page summarises Redx's own published documentation; your installer and Redx are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Rx 7000plus Series
- Meaning
- Charge/discharge current too high
- Likely cause
- Exceeds allowable range for the inverter
- What the manual says to do
- Check battery condition and ensure settings are correct.
- Manufacturer's severity
- Warning
Redx's documentation says this one needs your installer.
Extracted from Redx's published manual. Check it against the manual for your model. Open the source document
As documented for Rx
- Meaning
- Charge/discharge current of the battery is too high
- Likely cause
- Check if battery capacity exceeds allowable range.
- What the manual says to do
- Monitor battery current.
- Manufacturer's severity
- Warning
Redx's documentation says this one needs your installer.
Extracted from Redx's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Redx warranty phone
- +61 7 5672 9983
- Redx warranty email
- support@redx.com.au
- Redx service network
- Open the manufacturer's service page