Ningbo Sunways Technologies error codes
Ningbo Sunways Technologies inverter error code Grid Voltage Fault
Ningbo Sunways Technologies uses code Grid Voltage Fault in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Ningbo Sunways Technologies. This page summarises Ningbo Sunways Technologies's own published documentation; your installer and Ningbo Sunways Technologies are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for STS 3K 6KTL NS
- Meaning
- The grid voltage is outside allowed parameters.
- Likely cause
- The impedance of the AC cable may be too high, causing increase in grid voltage.
- What the manual says to do
- Change to a thicker AC cable if necessary, or extend the voltage protection range if allowed by the electricity company.
- Manufacturer's severity
- Critical
Ningbo Sunways Technologies's documentation says this one needs your installer.
Extracted from Ningbo Sunways Technologies's published manual. Check it against the manual for your model. Open the source document
As documented for STS XKTL P
- Meaning
- Grid voltage exceeded tolerable limits.
- Likely cause
- AC cable impedance might be too high, or voltage protection range needs adjustment.
- What the manual says to do
- Check the impedance of the AC cable and change to a thicker cable if necessary. Extend voltage protection range if allowed by the electricity company.
- Manufacturer's severity
- Critical
Ningbo Sunways Technologies's documentation says this one needs your installer.
Extracted from Ningbo Sunways Technologies's published manual. Check it against the manual for your model. Open the source document
As documented for STT 4 25KTL
- Meaning
- Grid overvoltage or undervoltage.
- Likely cause
- Check whether the safety regulation setting is correct. Check the voltage of the grid.
- What the manual says to do
- Contact local grid company for resolution.
- Manufacturer's severity
- Critical
Ningbo Sunways Technologies's documentation says this one needs your installer.
Extracted from Ningbo Sunways Technologies's published manual. Check it against the manual for your model. Open the source document
As documented for STH 3K 8KTL
- Meaning
- Grid voltage is out of acceptable limits
- Likely cause
- High impedance in the AC cable or incorrect voltage protection settings.
- What the manual says to do
- Check AC cable connections and possibly change cable size or settings.
- Manufacturer's severity
- Warning
Ningbo Sunways Technologies's documentation says this one needs your installer.
Extracted from Ningbo Sunways Technologies's published manual. Check it against the manual for your model. Open the source document
As documented for STH4 12kW
- Meaning
- Grid voltage is out of allowed range.
- Likely cause
- High impedance of the AC cable causing voltage increase.
- What the manual says to do
- Check if the impedance of the AC cable is too high. Consider using a thicker AC cable.
- Manufacturer's severity
- Warning
Extracted from Ningbo Sunways Technologies's published manual. Check it against the manual for your model. Open the source document
As documented for STS XKTL
- Meaning
- Grid voltage issue
- Likely cause
- Impedance of AC cable too high or voltage protection range not extended.
- What the manual says to do
- Check AC cable thickness and consult electricity company for voltage protection.
- Manufacturer's severity
- Warning
Extracted from Ningbo Sunways Technologies's published manual. Check it against the manual for your model. Open the source document
As documented for STT 4 25KTL P
- Meaning
- Voltage level is outside the acceptable range.
- Likely cause
- Cable impedance may be too high or voltage protection range not extended.
- What the manual says to do
- Investigate cabling and consult the electricity company about extending the voltage protection range.
- Manufacturer's severity
- Warning
Extracted from Ningbo Sunways Technologies's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
We don't have a warranty line on file for Ningbo Sunways Technologies yet. See the manufacturer contacts we do hold, or ask your installer.