Neovolt inverter error code 100020
Neovolt uses code 100020 in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Neovolt. This page summarises Neovolt's own published documentation; your installer and Neovolt are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for BW INV SP
- Meaning
- MPPT1 over temperature
- Likely cause
- Try to lower the ambient temperature.
- What the manual says to do
- Make sure that the inverter is installed according to the manual and there is no shelter around the inverter.
- Manufacturer's severity
- Warning
Neovolt's documentation says this one needs your installer.
Extracted from Neovolt's published manual. Check it against the manual for your model. Open the source document
As documented for BW
- Meaning
- MPPT1 Over Temperature Protection
- Likely cause
- Excessive temperature at MPPT.
- What the manual says to do
- Check environment and improve cooling system.
- Manufacturer's severity
- Warning
Neovolt's documentation says this one needs your installer.
Extracted from Neovolt's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Neovolt warranty phone
- +61 1300 901 706
- Neovolt warranty email
- sales@neovoltess.com
- Neovolt service network
- Open the manufacturer's service page