Kstar battery error code W14
WattMate is not affiliated with Kstar. This page summarises Kstar's own published documentation; your installer and Kstar are the authority on your system. WattMate doesn't repair systems or make site visits.
What it means
- Meaning
- BMS Discharge Over Current
- Likely cause
- Battery Management System detected over current during discharge.
- What the manual says to do
- Reduce load or disconnect temporarily to allow BMS to reset.
- Manufacturer's severity
- Warning
Kstar's documentation says this one needs your installer.
Extracted from Kstar's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Kstar warranty email
- service_solarinverter@kstar.com
- Kstar service network
- Open the manufacturer's service page