KSTAR error code F32
KSTAR's documents give more than one entry for code F32 in this product range. Check each against the manual for your model.
WattMate is not affiliated with KSTAR. This page summarises KSTAR's own published documentation; your installer and KSTAR are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Bluepulse (1 of 2)
- Meaning
- DSP communication Lost
- Likely cause
- Communication interruption
- What the manual says to do
- The manual's steps for this code are for your installer.
- Manufacturer's severity
- Critical
KSTAR's documentation says this one needs your installer.
Extracted from KSTAR's published manual. Check it against the manual for your model. Open the source document
As documented for Bluepulse (2 of 2)
- Meaning
- SCI Fault
- Likely cause
- Fault in System Control Interface.
- What the manual says to do
- Check interface connections and reset system.
- Manufacturer's severity
- Warning
KSTAR's documentation says this one needs your installer.
Extracted from KSTAR's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- KSTAR warranty email
- service_solarinverter@kstar.com
- KSTAR service network
- Open the manufacturer's service page