Kstar error code F13
Kstar uses code F13 in more than one product range, and it doesn't always mean the same thing. Check which range your equipment belongs to below.
WattMate is not affiliated with Kstar. This page summarises Kstar's own published documentation; your installer and Kstar are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Bluepulse
- Meaning
- Heatsink Temperature High
- Likely cause
- High operating temperature
- What the manual says to do
- The manual's steps for this code are for your installer.
- Manufacturer's severity
- Critical
Extracted from Kstar's published manual. Check it against the manual for your model. Open the source document
As documented for Bluepulse
- Meaning
- Sink Over Temp
- Likely cause
- Temperature at sink exceeds limits.
- What the manual says to do
- Allow cooling, inspect ventilation.
- Manufacturer's severity
- Warning
Kstar's documentation says this one needs your installer.
Extracted from Kstar's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Kstar warranty email
- service_solarinverter@kstar.com
- Kstar service network
- Open the manufacturer's service page