Kstar error code F10
Kstar uses code F10 in more than one product range, and it doesn't always mean the same thing. Check which range your equipment belongs to below.
WattMate is not affiliated with Kstar. This page summarises Kstar's own published documentation; your installer and Kstar are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Bluepulse
- Meaning
- INV Curr Over
- Likely cause
- Inverter current exceeds rated limits.
- What the manual says to do
- Reduce load and inspect inverter for issues.
- Manufacturer's severity
- Critical
Kstar's documentation says this one needs your installer.
Extracted from Kstar's published manual. Check it against the manual for your model. Open the source document
As documented for Bluespark
- Meaning
- INV Curr Over: The output current on the inverter exceeds the threshold.
- Likely cause
- Overload conditions in the loads connected to the inverter.
- What the manual says to do
- Wait five minutes for the inverter to restart automatically. Check and reduce load if necessary.
- Manufacturer's severity
- Warning
Extracted from Kstar's published manual. Check it against the manual for your model. Open the source document
As documented for Bluepulse
- Meaning
- Inverter Current High
- Likely cause
- High current detected in inverter
- What the manual says to do
- The manual's steps for this code are for your installer.
- Manufacturer's severity
- Warning
Extracted from Kstar's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Kstar warranty email
- service_solarinverter@kstar.com
- Kstar service network
- Open the manufacturer's service page