GoodWe inverter error code Relay Check Failure
GoodWe uses code Relay Check Failure in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with GoodWe. This page summarises GoodWe's own published documentation; your installer and GoodWe are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for ET
- Meaning
- Self-checking of relay failure
- Likely cause
- Neutral & ground cables are not connected well on AC side or just an occasional failure
- What the manual says to do
- Check (use multi-meter) if there is high voltage (normally should be lower than 10V) between N & PE cable on the AC side. If the voltage is higher than 10V, it means the Neutral & ground cable are not connected well on AC side or restart inverter.
- Manufacturer's severity
- Critical
GoodWe's documentation says this one needs your installer.
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
As documented for ET100K
- Meaning
- Self checking of relay failure
- Likely cause
- Neutral and ground cables are not connected properly on the AC side
- What the manual says to do
- Check connections using a multi-meter; if high voltage is detected, reconnect properly.
- Manufacturer's severity
- Critical
GoodWe's documentation says this one needs your installer.
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- GoodWe warranty phone
- 0399183905
- GoodWe warranty email
- service.au@goodwe.com
- GoodWe service network
- Open the manufacturer's service page