GoodWe battery error code Overcurrent When Charging
GoodWe uses code Overcurrent When Charging in more than one product range, and it doesn't always mean the same thing. Check which range your battery belongs to below.
WattMate is not affiliated with GoodWe. This page summarises GoodWe's own published documentation; your installer and GoodWe are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Lx
- Meaning
- Excessive current during charging
- Likely cause
- Battery settings or charger configuration issue
- What the manual says to do
- Restart the battery. If the problem persists, please contact GoodWe.
- Manufacturer's severity
- Warning
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
As documented for Lynx U G3 Series
- Meaning
- Overcurrent During Charging
- Likely cause
- Excessive current supplied during charging.
- What the manual says to do
- Restart the battery. If the problem persists, please contact GoodWe.
- Manufacturer's severity
- Warning
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- GoodWe warranty phone
- 0399183905
- GoodWe warranty email
- service.au@goodwe.com
- GoodWe service network
- Open the manufacturer's service page