GoodWe inverter error code Over Temperature
GoodWe uses code Over Temperature in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with GoodWe. This page summarises GoodWe's own published documentation; your installer and GoodWe are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Et
- Meaning
- Temperature inside of the inverter is too high
- Likely cause
- The inverter's working environment leads to a high temperature condition
- What the manual says to do
- 1. Try to decrease surrounding temperature. 2. Make sure the installation complies with the instruction on inverter user manual. 3. Try to close the inverter for 15 mins, then start up again.
- Manufacturer's severity
- Critical
GoodWe's documentation says this one needs your installer.
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
As documented for Geh
- Meaning
- Temperature inside of the inverter is too high
- Likely cause
- The inverter's working environment leads to a high temperature condition
- What the manual says to do
- Try to decrease surrounding temperature. Make sure the installation complies with the instruction on inverter user manual. Try to close the inverter for 15 mins, then start up again.
- Manufacturer's severity
- Critical
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
As documented for Gep5 10kw
- Meaning
- Inverter temperature too high.
- Likely cause
- Internal temperature exceeds normal operating range.
- What the manual says to do
- Reduce ambient temperature or relocate inverter to a cooler location.
- Manufacturer's severity
- Critical
GoodWe's documentation says this one needs your installer.
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
As documented for Ehb
- Meaning
- Temperature inside the inverter is too high
- Likely cause
- The inverter's working environment leads to a high temperature condition
- What the manual says to do
- Try to decrease surrounding temperature or close the inverter for 15 mins, then restart.
- Manufacturer's severity
- Warning
GoodWe's documentation says this one needs your installer.
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
As documented for Ht
- Meaning
- Over Temperature
- Likely cause
- Inadequate cooling or high ambient temperature
- What the manual says to do
- Inspect for proper cooling; contact service if issue persists.
- Manufacturer's severity
- Warning
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
As documented for Sdt G2
- Meaning
- The inverter is overheating due to poor ventilation or high ambient temperature.
- Likely cause
- Ensure good ventilated space for inverter operation.
- What the manual says to do
- Check installation environment and space for ventilation.
- Manufacturer's severity
- Warning
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- GoodWe warranty phone
- 0399183905
- GoodWe warranty email
- service.au@goodwe.com
- GoodWe service network
- Open the manufacturer's service page