GoodWe inverter error code EEPROM R/W Failure
GoodWe uses code EEPROM R/W Failure in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with GoodWe. This page summarises GoodWe's own published documentation; your installer and GoodWe are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for ET
- Meaning
- EEPROM read/write failure
- Likely cause
- Caused by a strong external magnetic field etc.
- What the manual says to do
- Try to restart the inverter, check if it still occurs. If not, it is just an occasional situation. Otherwise, contact after-sales immediately.
- Manufacturer's severity
- Warning
GoodWe's documentation says this one needs your installer.
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
As documented for ET100K
- Meaning
- Error caused by strong external magnetic field
- Likely cause
- External interference affecting internal memory writes
- What the manual says to do
- Restart the inverter and check if the error remains.
- Manufacturer's severity
- Information
Extracted from GoodWe's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- GoodWe warranty phone
- 0399183905
- GoodWe warranty email
- service.au@goodwe.com
- GoodWe service network
- Open the manufacturer's service page