FoxESS error code PLL_OverTime
FoxESS uses code PLL_OverTime in more than one product range, and it doesn't always mean the same thing. Check which range your equipment belongs to below.
WattMate is not affiliated with FoxESS. This page summarises FoxESS's own published documentation; your installer and FoxESS are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Power Cube
- Meaning
- The system detected that a three-phase system accessed single-phase AC. The system will try to reconnect.
- Likely cause
- Incorrect system configuration for three-phase connection.
- What the manual says to do
- Correct the connection and ensure a proper three-phase setup; contact support if needed.
- Manufacturer's severity
- Critical
FoxESS's documentation says this one needs your installer.
Extracted from FoxESS's published manual. Check it against the manual for your model. Open the source document
As documented for H3 Smart
- Meaning
- Three-phase system access single-phase AC.
- Likely cause
- Improper grid connection.
- What the manual says to do
- System will reconnect if the utility is back to normal. Seek help if not resolved.
- Manufacturer's severity
- Warning
Extracted from FoxESS's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
We don't have a warranty line on file for FoxESS yet. See the manufacturer contacts we do hold, or ask your installer.