Dyness battery error code E1
WattMate is not affiliated with Dyness. This page summarises Dyness's own published documentation; your installer and Dyness are the authority on your system. WattMate doesn't repair systems or make site visits.
What it means
- Meaning
- GFCI Fault (The ground leakage current is high)
- Likely cause
- Neutral & ground cables are not connected well on the AC side or just occasional failure.
- What the manual says to do
- Check using a multi-meter if there is a high voltage (normally should be lower than 10V) between the N&PE cable on the AC side.
- Manufacturer's severity
- Critical
Dyness's documentation says this one needs your installer.
Extracted from Dyness's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Dyness warranty phone
- 1300396377
- Dyness warranty email
- auservice@dyness-tech.com