Deye inverter error code F55
Deye uses code F55 in more than one product range, and it doesn't always mean the same thing. Check which range your inverter belongs to below.
WattMate is not affiliated with Deye. This page summarises Deye's own published documentation; your installer and Deye are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for Grid Connected Pv Inverter
- Meaning
- DC busbar voltage is too high
- Likely cause
- Check PV voltage and Ubus voltage and its detection circuit.
- What the manual says to do
- Inspect and adjust solar panel connections accordingly.
- Manufacturer's severity
- Critical
Deye's documentation says this one needs your installer.
Extracted from Deye's published manual. Check it against the manual for your model. Open the source document
As documented for Single Phase Hybrid Inverter
- Meaning
- DC busbar voltage is too high
- Likely cause
- BUS voltage is too high
- What the manual says to do
- 1. Check whether battery voltage is too high; 2. Check the PV input voltage, make sure it is within the allowed range; 3. Seek help from us, if cannot go back to normal state.
- Manufacturer's severity
- Critical
Deye's documentation says this one needs your installer.
Extracted from Deye's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Deye warranty phone
- (02) 8529 6809
- Deye warranty email
- service_au@deye.com.cn
- Deye service network
- Open the manufacturer's service page