Ambrion error code 31
Ambrion uses code 31 in more than one product range, and it doesn't always mean the same thing. Check which range your equipment belongs to below.
WattMate is not affiliated with Ambrion. This page summarises Ambrion's own published documentation; your installer and Ambrion are the authority on your system. WattMate doesn't repair systems or make site visits.
As documented for HS2
- Meaning
- ISO Error
- Likely cause
- Insulation fault detected in the system.
- What the manual says to do
- Disconnect and inspect for insulation failures.
- Manufacturer's severity
- Critical
Ambrion's documentation says this one needs your installer.
Extracted from Ambrion's published manual. Check it against the manual for your model. Open the source document
As documented for HS3
- Meaning
- PV array insulation error
- Likely cause
- The PV array is not properly insulated or connected
- What the manual says to do
- Ensure proper insulation of the PV array and check all connections.
- Manufacturer's severity
- Critical
Ambrion's documentation says this one needs your installer.
Extracted from Ambrion's published manual. Check it against the manual for your model. Open the source document
When to call your installer or the warranty line
Your installer is your first warranty contact. If they've gone, the manufacturer's warranty line still covers the hardware. Don't open the inverter or battery case yourself: work inside it is for a licensed electrician.
If you see smoke, scorch marks or smell burning, switch the system off at the AC and PV isolators and call your installer. If anyone is in danger, call 000.
- Ambrion warranty phone
- 1300444546
- Ambrion service network
- Open the manufacturer's service page